HARDINGE
TC 200-66/250

• Exquisite and strict assembly process guarantee, X/Z axis positioning/repeat positioning accuracy of full travel: 0.006/0.003mm (ISO 230-2)
• Processing example: material BSB, Spindle speed 1250rpm, processing roundness is 0.7μm, and the surface roughness is Ra0.2μm.

• The bed are made of high-quality gray cast iron for excellent rigidity and thermal stability.
• Using FEA finite element analysis technology, the mechanical structure is more reasonable.
• Equipped with heavy-duty roller guide, which can increase the rigidity by more than 30%.
• Practical measure: S45#, unilateral 8mm, material removal rate can reach 500cm³/min.

• Spindle speed: TC200/66 – 4200rpm, TC250 – 3500rpm.
• The rapid moving speed of X/Z axis can achieve 30m/min.
• The turret adopts servo-rotating non-lift structure with high precision and fast response.

• Compact structure, more flexible and convenient production line layout.
• Coolant tank and chip conveyor can be placed in the side or rear, without additional accessories.

The headstock adopts a large-span and high rigidity structure to ensure sufficient support strength on the spindle side and enhance thermal stability.

Equipped with heavy-duty roller guide, which enhances the rigidity of the machine and the anti-vibration performance during heavy cutting, ensuring that the machine has better heavy-duty cutting ability.

Standard MT#5 servo tailstock can be quickly positioned by the servo motor and programmed to adjust the thrust to meet various process requirements.

.

The bed is made of high-quality gray cast iron, and the latest FEA finite element analysis technology is used to ensure the optimization of the machine structure design and ensure that the machine has higher strength, rigidity and thermal stability. The 45° structure is easier for chip removal.

The reinforced motor seat and bearing support seat are adopted, and the lead screw is pre-stretched to ensure the transmission rigidity and processing stability.